1、Description
This specification applies to all performance specifications of cylindrical lithium ion cells and assembled batteries of PANASONIC.
2、Parameters of Battery Packs
The voltage, weight and other data of the assembled battery are approximately equal to the product of the number of single cells forming the combined battery and its corresponding value.
NO. | Items | Parameter |
1 | Nominal voltage | 48V |
2 | Rated capacity | 100Ah |
3 | Dimension (W×D×H) | 482*390*216mm |
4 | Combination method | 13S45P |
5 | Weight (Cartridge included) | About 43.6Kg |
6 | Maximum continuous charging current | 50A |
7 | Maximum continuous discharging current | 100A |
8 | Standard charging current | 20A |
9 | Standard discharging current | 20A |
10 | Total discharging cut-off voltage | 39V@100% |
11 | Total charging cut-off voltage | 53.3V@100% |
12 | Charging temperature range | 3℃~47℃ |
13 | Discharging temperature range | -15℃~57℃ |
Items | Parameter | |
Battery capacity | Rated capacity | 100Ah |
Cell charge protection | Over-charge protection voltage | 4050mV |
Protection delay time | 1S | |
Over-charge release voltage | 3900mV | |
Over-charge release condition | Discharge current | |
Cell discharge protection | Over-discharge protection voltage | 2900mV |
Protection delay time | 1S | |
Over-discharge release voltage | 3400mV | |
Over-discharge release condition | Charger connected |
Standard charge and discharge of the battery packs
Standard Charge : The battery is charged with constant current(0.2C) and constant voltage(52.65V) (CC-CV) strategy, and the cut-off current of 0.05C(5A)
Standard Discharge : The battery is discharged at a constant current of 0.2 C with a cut-off voltage of 37.7V.
5、Precautions for use
1) Never put the battery in water or wet it.
2) Do not charge or use the battery outside our specified temperature range; do not store, charge, or use this product near source of fire or heat.
3) If the battery emits odors or leaks, discontinue use or charge immediately, move it outdoors, away from any fire source, and contact us on time.
4) When connecting the load or charger, do not reverse the positive and negative terminals.
5) Do not use metallic conductors to produce short circuit in the positive and negative terminals of the battery.
6) Do not heat the battery or throw the battery into fire.
7) It is strictly forbidden to conduct artificial dissection of the battery pack, puncture the battery pack with nails or sharp objects, strike the battery pack with hammer or other external force, and stampede and drop the battery pack.
8) Do not place the battery in a pressure vessel.
9) If any abnormality occurs during charging or use, stop charging immediately and do not use it.
10) The optimum operating temperature of the product is 25 ± 5 ° C. If the product is not in the range of specified temperature during use, the discharge capacity will be affected.
11) If a malfunction or abnormality occurs during use, contact us, and do not disassemble the battery.